Skip to content

Printed Parts & Tools

Step 1 3HOME Enclosure

  • Print out the 3HOME Official Modular Enclosure for the 3MS.

    Printables

Step 2 Y-splitter

  • Print out one 4-way Y-splitter.

    Printables

    Alternate Splitters

    The linked Y-splitter uses five ECAS04 fittings, which are included in your 3MS kit. For your convenience, five PC4-M10 fittings are also included if you prefer to use an alternate Y-splitter design.

Step 3 Hex Keys

  • Ensure you have the following hex keys:

    🔴 1.5mm (included in kit but recommended to get your own)

    🟢 2mm

    🔵 2.5mm (included in the kit but recommended to get your own)

Step 4 Phillips & Flat-head Screwdrivers

  • Ensure you have:

    • A phillips-head screwdriver (used for the screw terminals for the PSU)

    • A flat-head screwdriver (used for the screw terminals on the SKR Pico)

Step 5 Wire Strippers

  • 🔴 Ensure you have wire strippers capable of stripping 24AWG wire (0.25mm2)

Step 6 Side Cutters

  • Ensure you have side cutters (used for cutting zip ties)

Extruders Assembly

Comments