Zonestar ZM384 (main MCU)
Max filament units: 3
MCU Name: main
main MCU
This configuration is a main MCU configuration, meaning that your printer should already be running off a ZM384 and you don't need to purchase one.
For each filament unit, purchase the following:
| Name | Quantity | Price | Link | Notes |
|---|---|---|---|---|
| NEMA17 Stepper Motor | 1 | $9.99 | Amazon | You can use a pancake stepper if you want, but it will have less torque |
| BMG Clone Extruder | 1 | $9.99 | Amazon | Alternatively, you can use this Dual-drive MK8 based extruder |
| PTFE Tubing | 1 | $8.99 | Amazon | You likely won't need this for every unit, as this is usually too long for only one unit |
| Filament Unit # | Motor Port |
|---|---|
| 0 | E0 |
| 1 | E1 |
| 2 | E2 |
| 3 | E3 |